1. With large capacity design and unique capacity expansion technology, the loading capacity is larger, which is increased by 10% compared with similar products.
2、强度耐磨钢，搅拌筒筒体材质和叶片材质均接纳520MPa强度耐磨钢，搅拌筒利用寿命到达5-8年。
2. Strength wear-resistant steel, 520mpa strength wear-resistant steel is adopted for the material of mixing cylinder and blade, and the service life of mixing cylinder can reach 5-8 years.
3、全入口液压三大件，搅拌筒全体利用高 强耐磨钢，出格增强易损零部件，大幅晋升打金鱼 的利用寿命。
3. All three imported hydraulic parts. The mixing drum uses high-strength wear-resistant steel as a whole, and vulnerable parts are specially strengthened to greatly improve the service life of the mixing truck.
4、国际的搅拌手艺：匀质性更好:国际更进步前辈的双对数螺旋曲线设想，佳的导流孔和搅拌板配比，使搅拌筒动弹更安稳，混凝土匀质性更好，根绝离析;
4. Domestic mixing technology: better uniformity: domestic more advanced double logarithmic spiral curve design and better ratio of diversion hole and mixing plate make the mixing drum rotate more stably, the concrete uniformity better and eliminate segregation;
5、收支料速率更快:怪异的大螺距设想，收支料速率比拟同类产物晋升百分之25，进料速率每分钟≥4m3，出料速率每分钟≥3m3。
5. Faster feeding and discharging speed: with the unique large pitch design, the feeding and discharging speed is 25% higher than that of similar products. The feeding speed is ≥ 4m3 per minute and the discharging speed is ≥ 3m3 per minute.
6、剩余率更低:后锥接纳边螺距螺旋线，叶片接纳行业的内凹三段式设想，剩余率≤百分之0.8。
6. Lower residual rate: the rear cone adopts side pitch helix, and the blade adopts the concave three-stage design of the industry, with the residual rate ≤ 0.8%.
7、整车设想全三维仿真，搅拌筒与收支料体系接纳高 强耐磨钢板，经由进程无限元仿真阐发，优化副车架布局，上装全体减重百分之12，加倍节能。
7. The whole vehicle is designed with full three-dimensional simulation. The mixing drum and feeding and discharging system adopt high-strength wear-resistant steel plate. Through finite element simulation analysis, the sub frame structure is optimized, and the overall weight of the upper assembly is reduced by 12%, which is more energy-saving.
8、轿车化的坐乘感触感染，人道化的操纵体系。
8. Car based ride experience and humanized operating system.