At the initial stage, the car is mainly maintained normally, and the cost is relatively low; When the concrete mixer is used for a certain period of time or driven for a certain mileage, it will enter the maintenance period, and the cost is relatively higher.
迷信地肯定各种颐养功课的间隔里程，不只能使打鱼注册送分
常常坚持杰出的手艺状态，还能使您节流颐养用度和补缀用度。对一些定点维修经销商的维修周期要细心考虑.究竟结果经销商是要赢利的。通俗手艺状态杰出的新车，可得当耽误颐养周期。而手艺状态较差，或利用条件卑劣的打鱼注册送分
，则应得当耽误颐养周期。
Scientifically determining the interval mileage of various maintenance operations can not only keep the concrete mixer in good technical condition, but also save you maintenance and repair costs. For some fixed-point maintenance, the dealer's maintenance cycle should be carefully considered After all, dealers want to make money. For new vehicles with good general technical conditions, the maintenance cycle can be extended appropriately. For the concrete mixer with poor technical conditions or poor service conditions, the maintenance cycle shall be appropriately shortened.
在决议打鱼注册送分
颐养周期时，应参照打鱼注册送分
制作厂的颐养周期，连系打鱼注册送分
自身的手艺状态和现实利用条件，对颐养周期要停止得当调剂。
When determining the maintenance period of concrete mixer truck, the maintenance period shall be properly adjusted with reference to the maintenance period of concrete mixer truck manufacturer and in combination with its own technical conditions and actual service conditions.
制动蹄片，打鱼注册送分
每行驶1万km需查抄一次。轮胎，每次颐养时应换位一次。机油，在每次做根基颐养时应改换。主动变速器油，每行驶2万km摆布应改换一次，新车 幸亏初始1000km时就改换。装有能源转向拆卸的打鱼注册送分
，则每行驶2万km或18个月应改换一次能源转向液。
The brake shoe and concrete mixer shall be inspected every 10000 km. The tires should be transposed every time they are serviced. The engine oil should be replaced every time basic maintenance is carried out. The automatic transmission oil should be replaced every 20000 km. It is better to replace the new car at the initial 1000km. For the concrete mixer equipped with power steering device, the power steering fluid shall be replaced every 20000 km or 18 months.
一：公道肯定掩护周期。汽车掩护周期是指汽车掩护的间隔里程或功夫。车主在理论利用历程中，应参照汽车制作厂举荐的掩护周期，接洽汽车自身的手艺环境和利用条件，对掩护周期停止得当的调剂。通俗来讲，新车在优胜的路况条件下利用，不必过于频仍地掩护，以厂家法则的掩护周期作为下限便可；而汽车手艺环境较差，或利用条件卑劣，则应得当耽误掩护周期。
1： Reasonably determine the protection period. Vehicle protection cycle refers to the distance, mileage or time of vehicle protection. In the process of practical application, the owner shall refer to the protection cycle recommended by the automobile manufacturer, and make appropriate adjustment to the protection cycle in connection with the skills and application premise of the automobile itself. Generally speaking, the new car is used under the premise of superior road conditions without too frequent protection, and the protection cycle specified by the manufacturer can be used as the upper limit; In case of poor vehicle skills or poor application conditions, the protection cycle shall be appropriately shortened.
二：充实利用收费检测。打鱼注册送分
出产厂家睁开的收费检测活动对车主是非常有好处，车主可以或许或许利用这些检测活动对车停止详细体检，及时发明并打扫一些潜伏的弊端，而后省去了将来可以或许或许显现的高额维修掩护用度。
2： Make full use of free testing. The free inspection campaign launched by the manufacturer of concrete mixer truck is often beneficial to the owner. The owner can use these inspection campaigns to conduct specific physical examination of the car, find and eliminate some potential problems in real time, and then save the high maintenance and protection costs that can be presented in the future.
三：尽可以或许或许少瓦解维修总成。良多打鱼注册送分
主都有这类感受，喜好车的某个总成在瓦解维修后便一发不可收拾，使车辆过早进入维修期。显现这类气象的启事重要涉及补葺工的拆卸手艺和配件品质等方面。因此， 好避免瓦解维修总成，利用各种前进的手艺掩护装备和车辆，对汽车停止免拆掩护，以避免给汽车总成和部件构成的不必要损伤，前进掩护品质，而后下降维修总用度。
3： Crash the service assembly as little as possible. Many concrete mixer owners have this feeling. They like that an assembly of the car can not be cleaned up after crash maintenance, which makes the vehicle enter the maintenance period too early. The reason for this scene mainly involves the assembly skills of repairmen and the quality of accessories. Therefore, it is necessary to prevent the collapse of the maintenance assembly, apply various advanced skills to protect the equipment and vehicles, and protect the vehicle from disassembly, so as to prevent unnecessary damage to the vehicle assembly and components, improve the protection quality, and then reduce the maintenance cost.