● feeding and discharging system
注册送200可提现的打鱼 收支料体系由进料斗、出料斗、主卸料槽、副卸料槽、支架、锁紧架等构成，是打金鱼 的首要构成局部，间接影响到收支料的速率和品质。进、出料斗经由进程支架和副车架的背景撑持架相连。出料斗及主卸料槽内加有衬板，衬板接纳高强度细晶粒合金钢，其耐磨才能为Q345A(原16Mn)的1.59倍，大幅度的进步了耐磨性。主卸料槽能使混凝土朝所要求的标的目的卸出，副卸料槽起耽误主卸料槽的长度的感化。
The feeding and discharging system of small concrete mixer is composed of feeding hopper, discharging hopper, main discharging tank, auxiliary discharging tank, support and locking frame. It is an important part of mixer and directly affects the speed and quality of feeding and discharging. The feeding hopper and the discharging hopper are connected with the backstage support frame of the subframe through a bracket. The liner is made of high strength fine grain alloy steel. Its wear resistance is 1.59 times of Q345A (original 16Mn), which greatly improves the wear resistance. The main discharge chute can discharge the concrete in the required direction, and the auxiliary discharge chute can extend the length of the main discharge chute.
在副卸料槽接永劫，拉下副卸料槽上的锁柄，锁紧。锁紧架在卸料槽不任务时，将主卸料槽锁定。卸料槽不任务时，将其向里一推，便会主动锁定，掀下锁柄，便可将卸料槽拉出。
When the auxiliary discharge chute is lengthened, pull down the lock handle on the auxiliary discharge chute to lock. The locking frame locks the main discharge chute when the discharge chute is not working. When the discharge chute is not working, push it inward, it will automatically lock, lift the lock handle, and then the discharge chute can be pulled out.
卸料槽节制杆起反转展转撑持卸料槽，及调理卸料槽槽口的高低位移的感化，接纳螺旋丝杠传动，定位精确，毗连靠得住，挪动时轻盈省力。锁紧杆将转至肆意一地位的卸料槽锁定。掀动手柄，便可消除锁定。
The control rod of the discharge chute has the function of supporting the discharge chute and adjusting the up and down displacement of the discharge chute notch. It is driven by spiral screw, with accurate positioning, reliable connection and light and labor-saving movement. The locking rod locks the discharge chute which is turned to any position. Lift the handle to release the lock.
●支配体系
Operating system
注册送200可提现的打鱼 支配体系由节制器、联动轴、软轴及连杆机构构成,首要节制搅拌筒的转速及扭转标的目的。打金鱼 后部两侧各安排一套节制器，摆布节制器能够实现联动，节制器上只要一根支配杆，接出端别离经由进程连杆机构毗连到变量泵上，经由进程转变泵上节制柄的角度来调理油泵的流量，从而实现节制筒体动弹的标的目的和速率，经由进程摆布挪动手柄来节制；该手柄同时还端经由进程软轴连到策念头的油门上，在须要加大转速时可高低挪动来支配手柄，节制此支配杆来实现筒体转速的进步。
The operating system of small concrete mixer is composed of controller, linkage shaft, flexible shaft and linkage mechanism, which mainly controls the rotation speed and direction of mixing drum. A set of controllers are arranged on both sides of the rear of the mixer truck, and the left and right controllers can realize linkage. There is only one control rod on the controller, and the connecting end is connected to the variable displacement pump through the connecting rod mechanism. The flow of the oil pump is adjusted by changing the angle of the control handle on the pump, so as to control the direction and speed of the cylinder rotation, which is controlled by moving the handle left and right; At the same time, the handle is connected to the throttle of the engine through the flexible shaft, and can be moved up and down to control the handle when the speed needs to be increased, so as to control the control lever to improve the cylinder speed.
●液压体系
Hydraulic system
注册送200可提现的打鱼 液压体系是由包含加速器和变量柱塞泵所构成的闭式回路，且变速箱与液压体系接纳统一油路。加速器选用德国ZF或意大利PMP公司出产的打鱼注册送分 公用加速器，柱塞泵、液压马达则选用德国力士乐公司的产物，能供给出色的输入机能和超长的利用寿命。全部体系所利用的光滑油型号为SAE15W-40，油品品级不低于以下规范：-MIL-L-46152C/-D/-E。
The hydraulic system of small concrete mixer is a closed circuit composed of reducer and variable piston pump, and the transmission and hydraulic system use the same oil circuit. The reducer is a special reducer for concrete mixer produced by ZF of Germany or PMP of Italy, while the plunger pump and hydraulic motor are made by Rexroth of Germany, which can provide excellent output performance and super long service life. The model of lubricating oil used in the whole system is SAE15W-40, and the oil grade is not lower than the following standards: - mil-l-46152c / - D / - E.
●电器体系
Electrical system
注册送200可提现的打鱼 打金鱼 的电器体系由三局部构成：冷却电扇节制局部和后示廓灯局部。冷却电扇节制局部：冷却电扇的起停由温度开关主动节制，温度高于65℃时电扇启动，低于60℃时电扇遏制。温度开关位于冷却器上，继电器与保险片在蓄电池旁电源继电器盒内。后示廓灯局部：后示廓灯用于夜间表现车后部表面巨细，与后派司灯同时点亮与燃烧。
The electric system of small concrete mixer consists of three parts: cooling fan control part and rear position indicator part. Cooling fan control part: the start and stop of the cooling fan is automatically controlled by the temperature switch. The fan starts when the temperature is higher than 65 ℃, and stops when the temperature is lower than 60 ℃. The temperature switch is located on the cooler, and the relay and fuse are in the power relay box beside the battery. Rear clearance lamp part: the rear clearance lamp is used to indicate the size of the rear contour of the vehicle at night, and is on and off at the same time as the rear license plate lamp.