When the brake of the automatic feeding mixer is about to stop, the steering wheel will always tilt to one side. This situation is actually what we usually call "offset braking". The main reason for the failure is that the left and right auxiliary pumps of the automatic feeding mixer brake system do not exert any force on the brake pads. It's caused by. In the process of driving, due to the rapid rotation of the brake disc of the automatic feeding mixer, the difference between the uneven action of the pump and the rapid friction is very small, which is difficult to feel.
在启动主动上料打金鱼
之前，须要十多分钟来加热汽车。主动上料打金鱼
的制动体系是策念头供给的压力，用于鞭策卡钳以夹紧制动盘（盘式制动器）或鞭策制动盘以使其与制动鼓磨擦（鼓式制动器）。是以，如上所述的环境能够是供给压力的传输管道中的压力丧失，致使没法实时供给制能源。在这类环境下，请查抄制动总泵的真空助力软管和主动上料打金鱼
策念头的捏词是不是破坏或松动。
Before starting the automatic feeding mixer, it takes more than ten minutes to heat the car. The brake system of the automatic feeding mixer is the pressure provided by the engine, which is used to push the calipers to clamp the brake disc (disc brake) or push the brake disc to make it friction with the brake drum (drum brake). Therefore, the situation described above may be the pressure loss in the transmission pipe that provides the pressure, resulting in the failure to provide the braking force in time. In this case, please check the vacuum booster hose of the brake master cylinder and the engine of the automatic feeding mixer for damage or looseness.
主动上料打金鱼
将不会前往到制动地位。踩下制动踏板，踏板不会升起，并且不阻力。这类景象是制动器不前往。有须要肯定是不是贫乏制动液，制动缸，管路和讨论是不是泄露和主缸和缸体整机是不是破坏。
The automatic feeding mixer will not return to the brake position. Press the brake pedal, the pedal will not rise, and there is no resistance. This phenomenon is that the brake does not return. It is necessary to determine whether there is a lack of brake fluid, whether the brake cylinder, pipelines and joints are leaking, and whether the master cylinder and cylinder parts are damaged.
准确进步混凝土搅拌站的出产效力
Correctly improve the production efficiency of concrete mixing plant
主动上料打金鱼
装备的代价首要在利用阶段，这是决议搅拌站装备性命周期的首要关键。任何夹杂站装备都有必然的利用规模和特定的利用前提。只要在知足利用规模和前提的环境下，搅拌装备能力具备更长的利用寿命。预拌混凝土的出产，运输和制作对利用预拌混凝土装备（特别是泵送混凝土）有必然的请求和划定。若是您不准确把握泵送手艺，并且不领会泵送前提和利用规模，将不可防止地致使保送失利。另外，搅拌站（修建物）的丈量请求和打金鱼
的运输时候请求准确利用预拌混凝土装备，以发生并取得经济好处。
The value of automatic feeding mixer is mainly in the use stage, which is the main link to determine the life cycle of the mixer. Any mixing station equipment has a certain range of use and specific conditions of use. Only in the case of meeting the scope and conditions of use, the mixing equipment can have a longer service life. The production, transportation and construction of ready mixed concrete have certain requirements and regulations on the use of ready mixed concrete equipment (especially pumping concrete). If you do not master the pumping technology correctly, and do not understand the pumping conditions and the scope of use, it will inevitably lead to the failure of transportation. In addition, the measurement requirements of the mixing plant (building) and the transportation time of the mixing truck require the correct use of the ready mixed concrete equipment to generate and obtain economic benefits.