Since the loading mixer truck, the gear beating of the mixer bucket loader generally occurs in the conflict project between the gearbox gears. Generally speaking, the gear beating will occur in the manual gearbox. Do you know why the gear beating of the manual mixer bucket occurs? Generally speaking, there will be synchronizer in the vehicle. Its function is to synchronize the high-speed gear with the gear that is about to enter the current gear.
我们都晓得在倒挡的状态下，产生打齿景象的次数反而会增添，这首要因为在搅拌斗中未装配同步器，是以在中断状态下，齿轮之间的差速器会随之变小，如许倒挡就会比拟顺畅。
We all know that under the condition of reverse gear, the number of tooth beating will increase. This is mainly because the synchronizer is not installed in the mixing bucket. Therefore, under the suspension state, the differential between gears will become smaller, so the reverse gear will be more smooth.
自上料打金鱼 搅拌斗装载机呈现打齿题目除螺旋伞齿、啮合副本身品质、调剂空隙不妥外，不准确的操纵进程是致使拌和斗呈现打齿题目的首要缘由。
In addition to the improper quality of spiral bevel gear, meshing pair and adjustment clearance, the incorrect operation process is the main reason for the toothing problem of mixing bucket.
自上料打金鱼 搅拌斗装载机在普通状态下，自上料打金鱼 普通几多钱一台，功课时前后桥一路驱动。若呈现*载、后桥离地等景象，其悉数负荷由前桥接管，前桥的主加速器很简略呈现破坏景象。
Under normal conditions, how much is a self loading mixer? The front and rear axles are driven together during operation. In case of * load, rear axle off the ground and other phenomena, all the load is accepted by the front axle, and the main reducer of the front axle is very simple to be damaged.
假设门架倾翻切入角过大，门架安排的太低，很简略产生前桥离地题目，悉数负荷由后桥接管，这时候候简略产生后桥主加速器破坏。而主加速器破坏八成因为断齿而产生了异响状态。
If the entry angle of gantry tipping is too large and the gantry is placed too low, the problem of front axle off the ground simply occurs, and all the load is accepted by the rear axle. At this time, the main reducer of the rear axle is simply damaged. The main reducer is damaged, and 80% of them have abnormal noise due to broken teeth.
自上料打金鱼 搅拌斗装载机不只是叉车用操纵的装备，一路拌和斗装载机还可以或许呈现一车多用处的景象。比方在插齿上装配拌和斗，搅拌斗不操纵了再将搅拌斗从插齿上抽出来作为装载机停止操纵。快速不说了，一路还费事、省时、省力且坚固。若客户本身家中有装载机只采办搅拌斗也是可以或许的。
The mixer bucket loader of self loading mixer truck is not only the equipment used by forklift, but also can be used for multiple purposes. For example, a mixing bucket is installed on the gear shaper. When the mixing bucket is not used, the mixing bucket is extracted from the gear shaper and used as a loader. Not to mention fast, it is also easy, time-saving, labor-saving and reliable together. If the customer has a loader at home, it is also possible to buy only a mixing bucket.