Self loading concrete mixer is an indispensable existence in our buildings. However, because the concrete will solidify into hard blocks in a short time and have certain corrosivity to steel and paint, cleaning the concrete adhered to the concrete storage tank and the inlet and outlet after each use of the concrete storage tank is a daily maintenance work that must be carried out carefully. These include:
1．每次装料前用水冲刷进料口，使进料口在装料时坚持潮湿；
1. Wash the feed port with water before each loading to keep the feed port wet during loading;
2．在装料的同时向随车自带的洗濯用水水箱中注满水；
2. Fill the cleaning water tank with water while loading;
3．装料后冲刷进料口，洗净进料口四周残留的混凝土；
3. After loading, wash the inlet and clean the residual concrete near the inlet;
4．到工地卸料后，冲刷出料槽，而后向混凝土贮罐内加洗濯用水30—40L；在车辆回程时坚持混凝土贮罐正向慢速动弹；
4. After unloading at the construction site, wash the discharge tank, and then add 30-40l of cleaning water to the concrete storage tank; Keep the concrete storage tank rotating forward and slowly when the vehicle returns;
5．下次装料前牢记放掉混凝土贮罐内的污水；
5. Remember to discharge the sewage in the concrete storage tank before the next loading;
6．天天出工时完全洗濯混凝土贮罐及收支料口四周，保障不粘有水泥及混凝土结块。
6. Thoroughly clean the concrete storage tank and around the inlet and outlet at the end of each day to ensure that there is no cement and concrete caking.
自上料式打鱼注册送分 洗濯掩护的要点先容，以上这些任务只需一次不当真停止，就会赐与后的任务带来很大的费事，以是但愿大师正视主动上料打金鱼 的洗濯。
Since the introduction of the key points of cleaning and maintenance of the feeding concrete mixer, if the above work is not carried out carefully once, it will bring great trouble to the future work. Therefore, I hope you will pay attention to the cleaning of the automatic feeding mixer.