Automatic concrete mixer. The belt conveyor has the advantages of strong conveying capacity, long conveying distance, simple structure and easy maintenance, and can easily implement programmed control and automatic operation. Full automatic concrete mixer and concrete mixing plant can not lack belt conveyor, and use belt conveyor to transport materials, etc. Therefore, attention should also be paid to maintenance when using.
1、传动拆卸的掩护与颐养。操纵前应加光滑油
1. Maintenance of transmission device. Add lubricating oil before use
2、滚简轴承的光滑。用光滑脂光滑，天天加油一次。
2. Lubrication of roller bearings. Lubricate with grease and add oil once a day.
3、滚简与托辊的清算。打鱼注册送分200元
，常常清算滚简和托辊上的积料，积料过量会影响皮带的运转，呈现跑偏的环境。打鱼注册送分200元
3. Cleaning of roller and idler. The full-automatic concrete mixer often cleans the accumulated materials on the roller and idler. Too much accumulated materials will affect the operation of the belt and lead to deviation. Automatic concrete mixer
4、刮砂拆卸的掩护。按期查抄刮砂拆卸的磨损水平，刮砂拆卸磨损到必然水平后实时改换。
4. Maintenance of sand scraper. Regularly check the wear degree of the sand scraping device, and replace the sand scraping device in time after it is worn to a certain extent.
5、打鱼注册送分200元
，橡皮挡边的改换。橡皮挡边磨损严峻，有料撒出时应实时改换。
5. Automatic concrete mixer, replacement of rubber retaining edge. The rubber retaining edge is seriously worn and should be replaced in time when materials are scattered.
6、接口断裂及横向扯破的提防及处置。讨论硫化处置分歧格;打击负载过大，软弱局部受交变应力影响断裂;接口标的目的与皮带活动标的目的分歧适；持久操纵等，严峻破坏皮带。打鱼注册送分200元
，在操纵时要尽可能削减负载，出格是有配重张紧拆卸的皮带，应节制配重在200kg~300kg内，以旱季不打滑为好，增强放哨，避免异物卡死皮带，划伤皮带;增强对皮带拆卸职员的培训，避免皮带接口标的目的装反。
6. Prevention and treatment of interface fracture and transverse tear. The joint vulcanization treatment is unqualified; The impact load is too large, and the weak part breaks under the influence of alternating stress; The interface direction is not suitable for the belt movement direction; If it is used for a long time, the belt will be seriously damaged. The full-automatic concrete mixer shall minimize the load when in use, especially the belt with counterweight tensioning device. The counterweight shall be controlled within 200kg ~ 300kg, and it is better not to slip in rainy season. Patrol inspection shall be strengthened to prevent foreign matters from blocking the belt and scratching the belt; Strengthen the training of belt assembly personnel to prevent reverse installation of belt interface.