With the continuous expansion of highway, railway and urban road construction projects, the company's construction market is gradually expanding need to use concrete, and concrete mixer is a common construction equipment, but the use of the process of problems are not less, such as equipment axle problems. So let's analyze it.
打鱼注册送分
抱轴的缘由：
Reasons for holding the shaft of concrete mixer truck:
搅拌机抱轴是由于在搅拌进程中粉料、砂石和液体夹杂所构成的粘结物，黏附在搅拌轴和搅拌臂上，穷年累月在其外表构成一层很是厚且不易清算的粘结物。
The agitator holds the shaft because in the process of mixing powder, sand and liquid formed by the mixture of adhesives, adhesion to the mixing shaft and the mixing arm, accumulated over a long period of time on its surface to form a layer of very thick and difficult to clean the adhesives.
打鱼注册送分
抱轴的风险：
Harm of concrete mixing truck holding shaft:
打鱼注册送分
厂家以为影响混凝土的品质，搅拌机抱轴后打出的混凝土搅拌不平均。增添了打鱼注册送分
的负载，耗能增大。影响耐磨件、轴端密封的寿命，加速耐磨件的磨损，抱轴后搅拌臂磨损很是严峻，利用寿命大大延长。
Concrete mixer manufacturer thinks that the quality of concrete is affected, and the concrete produced after the mixer holds the shaft is not evenly mixed. The load of concrete mixer is increased and the energy consumption is increased. It affects the life of wear-resistant parts and shaft end seal, speeds up the wear of wear-resistant parts, and the wear of the stirring arm after holding the shaft is very serious, and the service life is greatly shortened.
避免打鱼注册送分
抱轴的方式：
Methods to prevent the concrete mixer from holding the shaft:
调剂喂食挨次和时候。骨料和粉料事后夹杂后落入主机（但骨料必须先下一局部），使粉料在必然水平上附着在骨料上，削减落入主机的粉料。进步搅拌轴和搅拌臂的搅拌效力是能够的，也是能够的。
Adjust feeding order and time. The aggregate and powder are pre-mixed and then fall into the host (but the aggregate must be part of the next), so that the powder is attached to the aggregate to a certain extent, reducing the powder falling into the host. It is possible and possible to improve the mixing efficiency of the mixer shaft and the mixer arm.
主盖水管中间线请求与搅拌轴中间线在统一垂直立体内，搅拌臂与搅拌轴夹角上方有直喷喷嘴。由于搅拌臂与转轴的夹角是最轻易粘胶的处所，以是凡是从搅拌臂根部起头抱轴。同时，一直须要加水的时候。
The center line of the water pipe of the main cover shall be in the same vertical plane as the center line of the mixing shaft, and there shall be a direct spray nozzle above the Angle between the mixing arm and the mixing shaft. Because the Angle between the stirring arm and the rotating shaft is the easiest place to stick, the shaft is usually held from the root of the stirring arm. Also, it always takes time to add water.
搅拌出料后，装备操纵职员应实时洗濯、冲刷罐体，以确保断根粘附的混凝土。装备操纵职员应按期查抄计量体系入彀量桶的毗连和密封环境，注重是不是有泄露，若有则实时解除。
After mixing and discharging, equipment operators should clean and flush the tank in time to ensure the removal of adhesive concrete. Equipment operators should periodically check the connection and sealing of the metering barrels in the metering system to check whether there is leakage. If there is leakage, remove it in time.
当您在利用打鱼注册送分
的进程中碰到抱轴景象，必然要实时查明详细缘由，以便疾速处置，以避免影响您的一般任务。更多相干文题目就来http://zhaoyanfilter.com网站征询吧！
When you encounter the phenomenon of holding the axle in the process of using the concrete mixer, you must find out the specific reason in time, so as to solve it quickly, so as not to affect your normal work. More related questions come to http://zhaoyanfilter.com website consultation!